etaldoc 770/3 page 1 of 5 april 2005 product data sheet low distortion P3302 line matching transformer features applications ? lead-free (pb-free) ? v.90 and v.92 modems ? rohs compliant ? v.34 modems ? low distortion ? 12.6mm (0.5?) seated height ? iec 60950 and ul 60950 certified ? ul recognized component ? environmentally tested to iec 68 ? cert reliability tested ? excellent frequency response ? high thermal stability ? electrical substitute for xm-1025, 2802-b, and 671-8079 description P3302 is intended for v.90 and v.92 (56kbps) modems and other high-speed applications where ultra-low distortion at moderate power levels and very low voiceband frequencies is required at a most competitive price. P3302 is offered as a more compact internationally safety approved substitute for xm-1025, 2802-b and 671-8079 in existing circuits without changes to matching components. P3302 uses patented design and construction methods to achieve excellent signal performance and safety isolation to international standards. P3302 is certified to iec 60950 and ul 60950. p3355 is a ul recognized component and is supported by an iec cb test certificate. the part is completely lead-free, compliant with rohs directive 2002/95/ec, and suitable for lead-free and conventional processing. P3302 has been subjected to relevant environmental testing according to iec 68 and combined environmental reliability testing (cert) beyond normal operational levels and passed all tests, remaining fully functional. for new designs p3356 is recommended patented
P3302 etaldoc 770/3 page 2 of 5 april 2005 specifications electrical at t = 25oc and as reference circuit fig. 2 unless otherwise stated. parameter conditions min typ max units insertion loss f = 2khz, r l = 600 - 2.0 - db frequency response lf -3db cutoff hf -3db cutoff 100hz ? 4khz - - - 10 30 - - - 0.1 hz khz db return loss 200hz ? 4khz 26 30 - db third harmonic distortion (1) 150hz -3dbm in line - - -74 dbm voltage isolation (2) 50hz dc 2.12 3.0 - - - - kvrms kv operating range: functional storage 0 -40 - - +70 +85 oc oc lumped equivalent circuit parameters as fig. 1 dc resistance (3) , r dcp r dcs primary secondary 126 130 - - 154 160 leakage inductance, l 3.6 - 5.4 mh shunt inductance, lp 200hz 1v 8 18 - h shunt loss, rp 200hz 1v 16 19 - k notes: 1. third harmonic typically exceeds other harmonics by 10db. 2. components are 100% tested at 3.25kvdc. 3. caution: do not pass dc through windings. telephone line current must be diverted using semiconductor line hold circuit or choke. 4. at signal levels greater than 100mv, lp will increase and rp will decrease slightly but the effect is usually favourable to the return loss characteristic. equivalent circuit fi g . 1 ideal 1:1 ? l ? l r r patented
P3302 etaldoc 770/3 page 3 of 5 april 2005 construction dimensions shown are in millimetres (inches). geometric centres of outline and pin grid coincide within a tolerance circle of 0.6mm?. windings may be used interchangeably as primary or secondary. total weight typically 6.7g. patented 10nf 22 f 600 referenc e circuit fi g . 2 li ne 600 300* * increase to 430 to improve rx loss. return loss >20db 200hz - 4 k hz t xa2 t xa1 connections dimensions e 2
P3302 etaldoc 770/3 page 4 of 5 april 2005 environmental testing reliability testing to iec 68 tested to clauses of iec 68 and compliant with all functi onal and safety requirements following exposure as follows: test description iec 68 reference test details result robustness of terminations 68-2-21 test ua 1 68-2-21 test ua 2 tensile 5n pull thrust 1n push no impairment no pin detachment or distortion solderability 68-2-20 test ta method 1 solder bath 235oc 2s resistance to soldering heat 68-2-20 test tb method 1a 68-2-20 test tb method 2 solder bath 260oc 10s soldering iron 350oc 5s no impairment finish smooth, bright and even vibration 68-2-6 test fc sweep 10-55-10hz in 1 minute amplitude 1.5mm pk-pk duration 2h per axis, 3 axes no impairment shock 68-2-27 test ea peak acceleration 1000m/s 2 duration of pulse 6ms 3 shocks each direction on 3 axes no impairment cold 68-2-1 test ab -25oc 16h recovery to ambient 1-2h no impairment dry heat 68-2-2 test bb 125oc 16h recovery to ambient 1-2h no impairment damp heat 68-2-3 test ca 40oc 4 days, rh 93% recovery to ambient 1-2h no impairment change of temperature 68-2-14 test na t a ?25oc t b +85oc t 1 30 min 2 min t 2 3 min recovery to ambient 1-2h 5 cycles no impairment combined environmental re liability testing (cert) components step stressed at increasing levels of severity using combined stresses to detect potential weaknesses. results are shown for highest levels of stress tested. compliant with all functional and safety tests following exposure as follows: test description test details duration result storage test thermal cycling -30oc to +100oc at 11oc/min 6mm pk 2-9hz at 1 octave/min 20m/s 2 9-200hz 20 mins per plane no impairment transportation test thermal cycling -65oc to +80oc random vibration 10-200hz and 200-2000hz at 57m/s 2 rms 2 hours per plane no impairment
P3302 etaldoc 770/3 page 5 of 5 april 2005 safety absolute maximum ratings (ratings of components independent of circuit). constructed in accordance with iec 60950-1, en 60950-1 and ul 60950-1, supplementary insulation, 250vrms maximum working voltage, flammability class v-0. there are no special installation requirements (beyond attending to usual pcb track separations) since the integral cover provides supplementary insulation from its external faces to internal core and windings. short term isolation voltage (1s) dc current storage temperature lead temperature, 10s 2.12kvrms, 3.0 kvdc 100 a -40oc to +85oc 260oc certification intellectual property rights certified under the iec cb scheme (certificate dk-8570) to iec 60950-1-2001, sub-clauses 1.5, 1.5.1, 1.5.2, 1.7.1, 2.9, 2.9. 1, 2.9.2, 2.9.3, 2.10, 2.10.1, 2.10.2, 2.10.3, 2.10.3.1, 2.10.3.3, 2.10.4, 2.10.5, 2.10.5.1, 2.10.5.2, 2.10.5.4, 4.7, 4.7.1 (classv-1), 4.7.3, 4.7.3.1, 4.7.3.4, 5.2, 5.2. 1, 5.2.2, 6.1.2.1 (finland, norway, sweden national deviations) for a maximum working voltage of 250vrms, nominal mains supply voltage not exceeding 300vrms and a maximum operating temperature of 70oc in pollution degree 2 environments. recognized under the component recognition program of underwriters laboratories inc. to us and canadian requirements can/csa c22.2 no. 60950-1-03/ul60950-1, first edition, based on iec 60950-1, first edition, maximum working voltage 180vrms (creepage), 420v peak (clearance), pollution degree 2, supplementary insulation. ul file number e203175. additionally, profec technologies certifies all transformers as providing voltage isolation of 2.12kvrms, 3kv dc minimum. all shipments are supported by a certificate of conformity to current applicable safety standards. etal and P3302 are trade marks of profec technologies ltd. the trade mark etal is registered at the uk trade marks registry. profec technologies ltd. is the owner of the design right under the copyright designs and patents act 1988 and no rights or licences are hereby granted or implied to any third party. P3302 design and construction are protected by patents and registered design. british patent no. 2333646. usa patent nos. 6, 344, 787; 6,690,254 european patent no. 1082734 china patent no. zl 99806739.3 uk registered design no. 2077360. french registered design no. 991512. united states registered design 426, 815. mexico registered design 12143 other patents and registered designs pending. ? 1998 - 2005 profec technologies ltd. reproduction prohibited etal group oy, kuormatie 14, fin-03101, nummela telephone: +358 (0)20 7500 330 fax: +358 (0)20 7500 333 website: www.etalgroup.com email: etalgroup@egruppen.com fm 25326 iso 9001 e203175
|
